acrylic swimming poolWhat is the safety management?

1. Acrylic swimming pool opening hours are managed by the club, non-opening hours are prohibited to enter the swimming pool. 2. Strengthen safety education and enhance safety awareness. Establish the concept of safety and publicize the common sense of swimming safety and health to every swimmer. 3. Set up safety signs and life-saving equipment. Access to the swimming pool should comply with the following rules:

1) Follow the instructions of the coach and lifeguard. 2) It is strictly forbidden to dive, chase and slapstick in the pool and shore. 3) Beginners are forbidden to enter the water without the supervision of managers. 4) Be prepared carefully before swimming, and it is forbidden to do actions that may cause injury accidents in the swimming pool. 5) Take care of all the facilities of the swimming pool.

Hygienic Management of Acrylic Swimming Pool

1. Hygienic management of swimming pools. Regular thorough cleaning should be combined with regular medication to ensure the cleanliness of swimming places. Relevant management personnel should regularly clean up the swimming pool to prevent debris such as gravel and glass from harming the human body or affecting the water quality. Water quality and health management, to ensure that the pool is free of debris and floating objects, the pool to be disinfected as required.

2. Personal hygiene management. 1) Before taking part in swimming, you should have a health examination. If you feel uncomfortable during swimming, stop swimming. 2) Do a good job in swimming lessons, shower all over the dressing room and then enter the pool. 3) Make full preparations before entering the water, and then enter the pool. 4) It is not advisable to swim half an hour before meals or after strenuous exercise after meals. Before entering the water, be prepared for activities. Before entering the water, wipe the face, chest, back and thighs with water to avoid cramps. 5) pay attention to public health, do not spit, etc. Put an end to uncivilized, unsanitary behavior.

Acrylic swimming pool how to clean maintenance

The required water quality can be achieved 1. removing part or all of the impurities in the swimming pool water: the suspended solids visible in the swimming pool water are generally removed by physical means, and there are generally circulating filtration and pollution absorption. Swimming pool suction is a very important job in swimming pool cleaning. The cleaning of the swimming pool is achieved through the circulation filtration of water in daily life, but the circulation filtration cannot filter out tiny particles. At this time, we need to sink the suspended particles into the bottom of the pool and then suck the water out with a water suction machine. There are two main types of swimming pool water absorption machine: manual water absorption machine and automatic water absorption machine.

Secondly, adding new ingredients to the pool water can obtain the required water quality: for example, adding swimming pool disinfectant (trichloroisocyanuric acid) can meet the requirements of residual chlorine content in the water, and adding flake sodium or sodium carbonate can achieve pH control. Adding algaecides to eliminate algae in the water, these tasks are mainly achieved by chemical means-adding chemicals.