acrylic swimming poolThe alias is glass fiber reinforced plastic swimming pool, the surface material is methyl propyl methyl ester, coated with glass fiber, and reinforced with special resin. The entire swimming pool should be uniform in color and smooth in surface without stratification, bubbles, etc. Generally, the layer thickness is greater than 3mm, and the glass fiber is firmly bonded without peeling.

Acrylic swimming pool has slow heat transfer, so it has good heat preservation and the contact surface will not feel cold. Compared with cast iron or steel pools, it has a "warm and soft" feel. Since then, the processing performance of acrylic is better, so choose it to make a luxurious bathtub.

When installing an acrylic swimming pool, the bottom of the pool should be paved with yellow sand and cement slurry. It cannot be vacated or only rely on a few support points to avoid cracking. During use, sharp and hard objects should be prevented from collision and friction. When cleaning, gently wipe with a soft cloth and detergent.

The entire swimming pool should be uniform in color and smooth in surface without stratification, bubbles, etc. The surface thickness is generally above 3mm, and the glass fiber is firmly bonded without peeling.

Swimming is a whole-body exercise. We all know that the thermal conductivity of water is much greater than that of air, so the human body will emit more heat in the water. Secondly, in the process of swimming, almost all muscles have to work, thereby increasing the energy consumption during exercise. Since the density of water is higher than that of air, each leg and arm movement will consume more energy and become a natural resistance exercise. It is a better way to increase muscles and strengthen muscle strength, which is beneficial to correct and body posture, Make the posture more upright and more fit.

maintenance of acrylic swimming pool:

1. Clean once a week. When cleaning, use a sponge or flannel. Do not use coarse or scouring pads. Do not use every detergent containing granular objects. It can be cleaned with a mild detergent. After each use, rinse thoroughly with water and dry with a soft cloth. In case of stubborn stains, a small amount of abrasive detergent can be used to clean. Clean the bottom non-slip surface with a soft nylon brush. Do not use steel ball, wire brush or abrasive sponge brush.

2. Gentle treatment of pool surface stains, scale, mold. The surface can be brushed with a discarded soft-bristled toothbrush, which can not only remove stains, but also prevent mildew. If you encounter a stain that is difficult to wipe, you can also wipe it with half a lemon dipped in salt, or you can scrub it with a soft-bristled toothbrush coated with whitening toothpaste. For the scale, the products used to clean the toilet on weekdays are very useful. To deal with the molds and bacteria that cause fungal diseases, rinse with peroxidized water and dry immediately.