1.acrylic swimming poolMaintenance considerations.

1. Do not wipe the swimming pool with cleaning powder, it will corrode the surface and reduce the brightness.

2. It is strictly forbidden to wipe the surface of the swimming pool with sharp objects or abrasive objects.

3. After the swimming pool is installed, the silica gel needs 24 hours to cure. Generally, do not use it during this time, otherwise it will cause water leakage.

4. It is strictly forbidden to place light bulbs, open flames and high-temperature objects connected to the power supply in the swimming pool, otherwise it will leave traces or cause deformation of the swimming pool.

5. Avoid contact with strong organic solvents such as paint, volatile agent, thinner, etc., otherwise it may cause surface softening, dissolution, cracking and other phenomena that endanger product quality.

6. It is forbidden to add boiling water directly to the swimming pool. When swimming, add cold water before heating. Acrylic products begin to soften when heated at 100°C, so avoid storage and use at high temperatures above 60°C.

7. Strictly use highly corrosive chemical liquids (such as sulfuric acid, hydrochloric acid, lye) to wipe. The surface of pool body and hardware fittings shall not be disinfected with strong corrosive disinfectant such as 84 disinfectant. Disinfection supplies can choose the baby pool special disinfectant disinfection or other physical disinfection methods.

2.acrylic swimming poolCleaning Precautions

1. When cleaning the acrylic swimming pool every week, use sponge or flannel, do not use coarse cloth or scouring pad, do not use any detergent containing granular objects, and avoid direct sunlight and high temperature contact. After each water change in the children's swimming pool, wash it thoroughly with clean water and dry it with a soft cloth. When cleaning, use mild detergent, do not use abrasive detergent, or use glass water cleaning.

2. Timely repair traces. Do not hit or hit the surface of the swimming pool with hard objects to cause scratches or abrasions. If you accidentally scratch, you can use 2000c water sandpaper to polish, and then use toothpaste and soft cloth to polish.

3. Deal with pipeline blockage at any time, use special pipeline cleaner, and disinfect the sewer pipe on time. It is recommended to clean once or twice a month to remove the smell and prevent the growth of bacteria.